Racelogic USER GUIDE Bedienungsanleitung PDF herunterladen (Seite 46)

RACELOGIC Traction Control Manual V3.0

Page 46

i.e. if ‘Delay slip override’ is set to 5% and ‘Start delay’ is set to 2 seconds,

5% will be added to each of the percentage slip values for 2 seconds during

launch mode.

Slip to reinstate traction control

The slip threshold, at which the traction control will switch from Launch mode

to normal Traction Control operation.

Default value: 5 %

DRY Settings , WET Settings

Hard Cut

Set the hard cut slightly above the soft cut to achieve a smooth rev-limit.

E.g. If the soft cut is at 4500 Rpm, set the hard cut at 4750 Rpm.

Two values can be entered under WET and DRY and can be switched using

the manual adjuster to select wet or dry settings.

Default value: Dry 4800 RPM , Wet 4300 RPM

Soft Cut

Set the soft cut rev-limit to just below the desired Rpm. Two values can be

entered under WET and DRY and can be switched using the manual adjuster

to select wet or dry settings.

Default value: Dry 4500 RPM , Wet 4000 RPM

Start delay

The period of time at which the ‘Delay slip override’ percentage is added to

the overall percentage slip values during launch.

Default value: Dry 2 seconds , Wet 2 seconds

Slow override speed threshold

This threshold works in conjunction with the ‘Slip Override For Slow Speed Getaway’.

Below this speed the Percentage Override setting is added to each of the percentage

slip values.

Default value: Dry 30 kmh , Wet 25 kmh

Slip to reinstate Traction

Control (%)

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 66 67

Keine Kommentare

Racelogic USER GUIDE Bedienungsanleitung Seite 46